ORUST NECK SYSTEM LATEX SEAL

sitech orust neck system latex seal: ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. The Neck Ring and the Lock Ring is made in a softer material and clips are added to keep the neck seal in place. Tool is no longer needed for installation of the neck seal; the seal and Lock Ring can easily be mounted into the PU-Ring by hand.

ATT-400 ACOUSTIC TARGET TRANSPONDER

The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.

ORUST NECK SYSTEM SILICONE SEAL

sitech orust neck system silicone seal: ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. The Neck Ring and the Lock Ring is made in a softer material and clips are added to keep the neck seal in place. Tool is no longer needed for installation of the neck seal; the seal and Lock Ring can easily be mounted into the PU-Ring by hand.

ULB-350 LOW COST LOCATION BEACON

This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.

DPR-275 DIVER PINGER RECEIVER

This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.

SITECH BALANCED PEE VALVE

Use a Pee Valve and extend your bottom time. No use having loads of breathing gas when nature prevents you from concentrating. Long working hours and deco times are no longer a problem. Relieve yourself in a donned drysuit!

PRS275 PINGER RECEIVER SYSTEM

The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.

BASIC DIR HARNESS

This basic harness uses 25 feet of 2 inch nylon webbing material, 3 stainless steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily repositioned for optimal configuration with an OMS Stainless Steel buckle. A 2 inch sewn crotch strap with a 2 inch Scooter “D” ring is also included. This harness is available to be installed on a diver’s backplate or on the OMS Aluminum or Stainless Steel backplates. Divers that prefer the simplest, most utilitarian harness generally choose this configuration. Available as a Kit or installed on OMS Backplates

TRIM WEIGHT POCKET

Designed to be mounted on 2 inch webbing, vertically or horizontally. Can be used on nylon tank bands to augment the divers trim.

TRIESTE WING 94 LB TWIN

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.

PERFORMANCE WING 32 LB SINGLE

The Performance Mono Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. This is the ideal wing for the traveling diver as it is small, lightweight and easy to pack. The Mono wing will fit onto the IQ pac, Aluminum or Stainless Steel Backplate using the Comfort harness II or Continuous weave (Dir) harness.

PERFORMANCE WING 45 LB DOUBLE

The Performance Double Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other and is designed specifically for use with double tanks. Donut configuration allows air to travel from one side of the air cell to the other easily, this reduces the possibility of air trapping on one side of the wing.

TRIESTE WING 60 LB TWIN

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.